Difference between revisions of "M2MBridge updates"
From AMTech WikiDocs
| Line 1: | Line 1: | ||
* M2MBridge updates are managed from the amtechM2mBridge template thing and the cloned amtechM2mBridge instance used in the configuration of the M2MBridge. | * M2MBridge updates are managed from the amtechM2mBridge template thing and the cloned amtechM2mBridge instance used in the configuration of the M2MBridge. | ||
| − | * Once a [[Set up a new Raspberry | + | * Once a [[Set up a new Raspberry PI|new M2MBridge image is flashed into a Raspberry Pi]] and the M2MBridge is configured following [[Edge Configuration#Bridge Configuration|this form]], a pre-execution script will run to download the M2MBridge version specified in the configured template. |
: ''Important remark'': Note that this first time you run the bridge, you need to be sure that the bridge has a configured Internet connection and the configured template has a valid version set. Otherwise the download will fail and the M2MBridge will not start. | : ''Important remark'': Note that this first time you run the bridge, you need to be sure that the bridge has a configured Internet connection and the configured template has a valid version set. Otherwise the download will fail and the M2MBridge will not start. | ||
* After this initial setup, the service is started and a clone of that template is generated with the same version specified in the template. | * After this initial setup, the service is started and a clone of that template is generated with the same version specified in the template. | ||
* Any further change to that instance version will be honored by the bridge and an over-the-air update will be applied with a consequent restart of the M2MBridge service. | * Any further change to that instance version will be honored by the bridge and an over-the-air update will be applied with a consequent restart of the M2MBridge service. | ||
Revision as of 13:45, 19 April 2018
- M2MBridge updates are managed from the amtechM2mBridge template thing and the cloned amtechM2mBridge instance used in the configuration of the M2MBridge.
- Once a new M2MBridge image is flashed into a Raspberry Pi and the M2MBridge is configured following this form, a pre-execution script will run to download the M2MBridge version specified in the configured template.
- Important remark: Note that this first time you run the bridge, you need to be sure that the bridge has a configured Internet connection and the configured template has a valid version set. Otherwise the download will fail and the M2MBridge will not start.
- After this initial setup, the service is started and a clone of that template is generated with the same version specified in the template.
- Any further change to that instance version will be honored by the bridge and an over-the-air update will be applied with a consequent restart of the M2MBridge service.
