Set up a new Raspberry PI

Steps to set up a Raspberry PI with AMTech M2MBridge

• Login to the application UI as a follower user
• Go to Sensors > M2MBridge Application menu and download the provided Raspberry PI image
• Remove the memory card from the PI and insert it into your computer
• Identify the device path for the memory card under /dev directory (you may use gnome-disks as auxiliary tool)
• Write the image to the memory card. Using ddrescue:

sudo ddrescue -f /path/to/amtech-ubuntu-mate-16.04.2-desktop-armhf-raspberry-pi-compat.img /dev/<deviceid>

• Remove the card from your computer and reinsert it into the Raspberry PI
• Boot the PI
  • Wired network interface is auto configured using DHCP
  • Wireless network is autoconfigured as an AP with SSID 'amtech-pi'; password is 'freepass'. If you connect to this network, the PI will have address 192.168.0.1
  • SSH is enabled
• SSH to the PI by using the following credentials:

User: amtech

Password: 4mt3ch.

• Execute sudo raspi-config to expand the filesystem
  • Go to "Advanced Options" > "Expand Filesystem"
  • Go to "Finish" and reboot the PI
• Go to http://<address of your pi>/ to start configuring the PI