Set up a new Raspberry PI

From AMTech WikiDocs
Revision as of 01:23, 20 August 2017 by Amarrero (Talk | contribs) (Created page with "==Steps to set up a Raspberry PI with AMTech M2MBridge== * Download image from provided source * Remove the memory card from the PI and insert it into your computer * Identif...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Steps to set up a Raspberry PI with AMTech M2MBridge

  • Download image from provided source
  • Remove the memory card from the PI and insert it into your computer
  • Identify the device path for the memory card under /dev directory (you may use gnome-disks as auxiliary tool)
  • Write the image to the memory card. Using ddrescue:
sudo ddrescue -f /path/to/amtech-ubuntu-mate-16.04.2-desktop-armhf-raspberry-pi-compat.img /dev/<deviceid>
  • Remove the card from your computer and reinsert it into the Raspberry PI
  • Boot the PI (network interface is auto configured using DHCP and SSH is enabled)
  • SSH to the PI by using the following credentials:
User: amtech
Password: 4mt3ch.
  • Execute sudo raspi-config to expand the filesystem
    • Go to "Advanced Options" > "Expand Filesystem"
    • Go to "Finish" and reboot the PI
  • Go to http://<address of your pi>/bridgeconf to start configuring the PI
Retrieved from "http://wiki.amtech.mx/mediawiki/index.php?title=Set_up_a_new_Raspberry_PI&oldid=3159"