Difference between revisions of "Set up a new Raspberry PI"
From AMTech WikiDocs
| Line 16: | Line 16: | ||
: User: amtech | : User: amtech | ||
: Password: 4mt3ch. | : Password: 4mt3ch. | ||
| + | <!-- | ||
* Execute <code>sudo raspi-config</code> to expand the filesystem | * Execute <code>sudo raspi-config</code> to expand the filesystem | ||
** Go to "Advanced Options" > "Expand Filesystem" | ** Go to "Advanced Options" > "Expand Filesystem" | ||
** Go to "Finish" and reboot the PI | ** Go to "Finish" and reboot the PI | ||
* Go to http://<address of your pi>/ to start configuring the PI | * Go to http://<address of your pi>/ to start configuring the PI | ||
| + | --> | ||
Revision as of 17:24, 24 October 2017
Steps to set up a Raspberry PI with AMTech M2MBridge
- Login to the application UI as a follower user
- Go to
Sensors > M2MBridge Applicationmenu and download the provided Raspberry PI image- the image file is downloaded as .gz file, extract it to a .img file.
- Remove the memory card from the PI and insert it into your computer
- Identify the device path for the memory card under /dev directory (you may use gnome-disks as auxiliary tool)
- Write the image to the memory card. Using
ddrescue:
-
sudo ddrescue -f /path/to/amtech-ubuntu-mate-16.04.2-desktop-armhf-raspberry-pi-compat.img /dev/<deviceid>
- Remove the card from your computer and reinsert it into the Raspberry PI
- Boot the PI
- Wired network interface is auto configured using DHCP
- Wireless network is autoconfigured as an AP with SSID 'amtech-pi'; password is 'freepass'. If you connect to this network, the PI will have address 192.168.0.1
- SSH is enabled
- SSH to the PI by using the following credentials:
- User: amtech
- Password: 4mt3ch.
