Set up a new Raspberry PI
From AMTech WikiDocs
Revision as of 00:23, 20 August 2017 by Amarrero (Talk | contribs) (Created page with "==Steps to set up a Raspberry PI with AMTech M2MBridge== * Download image from provided source * Remove the memory card from the PI and insert it into your computer * Identif...")
Steps to set up a Raspberry PI with AMTech M2MBridge
- Download image from provided source
- Remove the memory card from the PI and insert it into your computer
- Identify the device path for the memory card under /dev directory (you may use gnome-disks as auxiliary tool)
- Write the image to the memory card. Using
ddrescue
:
-
sudo ddrescue -f /path/to/amtech-ubuntu-mate-16.04.2-desktop-armhf-raspberry-pi-compat.img /dev/<deviceid>
- Remove the card from your computer and reinsert it into the Raspberry PI
- Boot the PI (network interface is auto configured using DHCP and SSH is enabled)
- SSH to the PI by using the following credentials:
- User: amtech
- Password: 4mt3ch.
- Execute
sudo raspi-config
to expand the filesystem- Go to "Advanced Options" > "Expand Filesystem"
- Go to "Finish" and reboot the PI
- Go to http://<address of your pi>/bridgeconf to start configuring the PI