Difference between revisions of "Aggregation"
From AMTech WikiDocs
(English, typos and grammar) |
|||
| Line 1: | Line 1: | ||
| − | Aggregates observations read from | + | Aggregates observations read from multiple m2m bridges. As a use case, an area has multiple M2Mbridges using beacons to track "things", the intention is to aggregate all the reads done by the deployed M2Mbrigdes into one and execute a centralized smoothing process; if at least one bridge sees the beacons the thing is inside; if no one bridge sees the beacon the things is out. |
*Aggregation can be configured by thing type | *Aggregation can be configured by thing type | ||
*This configuration is done at amtechM2MBridge instance level | *This configuration is done at amtechM2MBridge instance level | ||
| − | **Set aggregation type | + | **Set aggregation type: the list of Thing types that the bridge aggregates |
***Only one bridge can be aggregating a Thing type on a local area network | ***Only one bridge can be aggregating a Thing type on a local area network | ||
| − | **Set aggregation instances | + | **Set aggregation instances: the list of instances that will act as sources. |
***Only one instance by Thing Type can be set. | ***Only one instance by Thing Type can be set. | ||
**Selecting multiples bridge instances and validating the configurations validates aggregation settings. | **Selecting multiples bridge instances and validating the configurations validates aggregation settings. | ||
'''At the moment aggregation works just for BLEPeripheralsScanner and BLEbeaconsScanner''' | '''At the moment aggregation works just for BLEPeripheralsScanner and BLEbeaconsScanner''' | ||
Latest revision as of 23:09, 11 October 2016
Aggregates observations read from multiple m2m bridges. As a use case, an area has multiple M2Mbridges using beacons to track "things", the intention is to aggregate all the reads done by the deployed M2Mbrigdes into one and execute a centralized smoothing process; if at least one bridge sees the beacons the thing is inside; if no one bridge sees the beacon the things is out.
- Aggregation can be configured by thing type
- This configuration is done at amtechM2MBridge instance level
- Set aggregation type: the list of Thing types that the bridge aggregates
- Only one bridge can be aggregating a Thing type on a local area network
- Set aggregation instances: the list of instances that will act as sources.
- Only one instance by Thing Type can be set.
- Selecting multiples bridge instances and validating the configurations validates aggregation settings.
- Set aggregation type: the list of Thing types that the bridge aggregates
At the moment aggregation works just for BLEPeripheralsScanner and BLEbeaconsScanner
