Difference between revisions of "Aggregation"
From AMTech WikiDocs
| Line 1: | Line 1: | ||
Aggregation allows to consolidate information read from many m2m bridges.Use case, an area has multiple M2Mbridges using beacons to track "things", the intention is to aggregate all the reads done by the deployed M2Mbrigdes in one and executed a centralized smoothing process; if at less one bridge sees the beacons the thing is inside; if no one bridge sees the beacon the things is out. | Aggregation allows to consolidate information read from many m2m bridges.Use case, an area has multiple M2Mbridges using beacons to track "things", the intention is to aggregate all the reads done by the deployed M2Mbrigdes in one and executed a centralized smoothing process; if at less one bridge sees the beacons the thing is inside; if no one bridge sees the beacon the things is out. | ||
| + | *The aggregatio works by thing type | ||
*This configuration is done at amtechM2MBridge level | *This configuration is done at amtechM2MBridge level | ||
| − | **Set | + | **Set aggregators The list of Thing types that the bridge aggregates |
| − | **Set | + | **Set source instances The list of instances that will act as aggregators, only one aggregator by Thing type is allowed on a local area network. |
| + | |||
| + | |||
'''At the moment aggregation works just for BLEPeripheralsScanner and BLEbeaconsScanner''' | '''At the moment aggregation works just for BLEPeripheralsScanner and BLEbeaconsScanner''' | ||
Revision as of 13:18, 5 October 2016
Aggregation allows to consolidate information read from many m2m bridges.Use case, an area has multiple M2Mbridges using beacons to track "things", the intention is to aggregate all the reads done by the deployed M2Mbrigdes in one and executed a centralized smoothing process; if at less one bridge sees the beacons the thing is inside; if no one bridge sees the beacon the things is out.
- The aggregatio works by thing type
- This configuration is done at amtechM2MBridge level
- Set aggregators The list of Thing types that the bridge aggregates
- Set source instances The list of instances that will act as aggregators, only one aggregator by Thing type is allowed on a local area network.
At the moment aggregation works just for BLEPeripheralsScanner and BLEbeaconsScanner
