Difference between revisions of "Set up a new Raspberry PI"
From AMTech WikiDocs
(Created page with "==Steps to set up a Raspberry PI with AMTech M2MBridge== * Download image from provided source * Remove the memory card from the PI and insert it into your computer * Identif...") |
|||
| Line 7: | Line 7: | ||
: <code>sudo ddrescue -f /path/to/amtech-ubuntu-mate-16.04.2-desktop-armhf-raspberry-pi-compat.img /dev/<deviceid></code> | : <code>sudo ddrescue -f /path/to/amtech-ubuntu-mate-16.04.2-desktop-armhf-raspberry-pi-compat.img /dev/<deviceid></code> | ||
* Remove the card from your computer and reinsert it into the Raspberry PI | * Remove the card from your computer and reinsert it into the Raspberry PI | ||
| − | * Boot the PI | + | * Boot the PI |
| + | ** Wired network interface is auto configured using DHCP | ||
| + | ** Wireless network is autoconfigured as an AP with SSID 'amtech-pi'; password is 'freepass'. If you connect to this network, the PI will have address 192.168.0.1 | ||
| + | ** SSH is enabled | ||
* SSH to the PI by using the following credentials: | * SSH to the PI by using the following credentials: | ||
: User: amtech | : User: amtech | ||
| Line 14: | Line 17: | ||
** Go to "Advanced Options" > "Expand Filesystem" | ** Go to "Advanced Options" > "Expand Filesystem" | ||
** Go to "Finish" and reboot the PI | ** Go to "Finish" and reboot the PI | ||
| − | * Go to http://<address of your pi>/ | + | * Go to http://<address of your pi>/ to start configuring the PI |
Revision as of 16:32, 29 August 2017
Steps to set up a Raspberry PI with AMTech M2MBridge
- Download image from provided source
- Remove the memory card from the PI and insert it into your computer
- Identify the device path for the memory card under /dev directory (you may use gnome-disks as auxiliary tool)
- Write the image to the memory card. Using
ddrescue:
-
sudo ddrescue -f /path/to/amtech-ubuntu-mate-16.04.2-desktop-armhf-raspberry-pi-compat.img /dev/<deviceid>
- Remove the card from your computer and reinsert it into the Raspberry PI
- Boot the PI
- Wired network interface is auto configured using DHCP
- Wireless network is autoconfigured as an AP with SSID 'amtech-pi'; password is 'freepass'. If you connect to this network, the PI will have address 192.168.0.1
- SSH is enabled
- SSH to the PI by using the following credentials:
- User: amtech
- Password: 4mt3ch.
- Execute
sudo raspi-configto expand the filesystem- Go to "Advanced Options" > "Expand Filesystem"
- Go to "Finish" and reboot the PI
- Go to http://<address of your pi>/ to start configuring the PI
