How to install & execute

Os and core components

Manual installation of initial components and prerequesites

• Installs Ubuntu OS on a Raspberry PI

https://ubuntu-mate.org/raspberry-pi/

• Boot PI and update packages:

sudo apt-get update

sudo apt-get dist-upgrade

• Install java 7 (if LLRPReader is needed)

sudo add-apt-repository ppa:webupd8team/java

sudo apt-get update

sudo apt-get install oracle-java7-installer

• Install nodejs 5.x by adding this repository 'deb https://deb.nodesource.com/node_5.x xenial main' with:

curl -sL https://deb.nodesource.com/setup_5.x | sudo -E bash -

and then:

sudo apt-get install -y nodejs

• Installs and configures Bluetooth core libraries

sudo apt-get install bluetooth bluez libbluetooth-dev libudev-dev

• Allow nodejs to read from bluetooth devices (require by bluetooth related plugins):

sudo setcap 'cap_net_raw+eip' /usr/bin/nodejs

• Allow non-privileged users (belonging to gpio group) to run GPIO commands:

git clone git://github.com/quick2wire/quick2wire-gpio-admin.git

cd quick2wire-gpio-admin

make

sudo make install

• Install snmp if you are planning to configure a SNMPDevice instance to monitor the Raspberry Pi

   how-to-install-and-configure-an-snmp-daemon-and-client-on-ubuntu-14-04
   sudo apt-get update
   sudo apt-get install snmp snmp-mibs-downloader
   sudo apt-get update
   sudo apt-get install snmpd
   sudo download-mibs
   ======================================================================
   Edit /etc/snmp.conf
   remove comment from #mibs : to mibs : 
   =======================================================================
   Edit /etc/snmp/snmpd.conf
   1)At ACCESS CONTROL give Full access from the local $
   *remove comment the line rocommunity public  localhost 
   *add the line rwcommunity private
   *comment #rocommunity public  default    -V systemonly
   *comment # rocommunity6 public  default   -V systemonly
       ###############################################################################
       #
       #  ACCESS CONTROL
       #
                                                        #  Full access from the local $
        rocommunity public  localhost
        rwcommunity private
                                                        #  Default access to basic sys$
       # rocommunity public  default    -V systemonly
       #  rocommunity6 is for IPv6
       # rocommunity6 public  default   -V systemonly
   2)At SYSTEM INFORMATION to make write/read sysLocation and sysContact
   *comment line #sysLocation    xxxxxx
   *comment line  #sysContact     xxxxxx
       ###############################################################################
       #
       #  SYSTEM INFORMATION
       #
       #  Note that setting these values here, results in the corresponding MIB object$
       #  See snmpd.conf(5) for more details
       #sysLocation    xxxxxx
       #sysContact     xxxxxx       
   ========================================================================================
   sudo service snmpd restart

M2MBridge installation

• Install git:

sudo apt-get install git

• Clone git repository (https://github.com/AMTechMX/M2MBridge.git)

git clone https://github.com/AMTechMX/M2MBridge.git

• Delete unneeded plugins from /.../M2MBridge/plugins/xxx (optional)
• Install packages for m2mBridge core and plug-ins (https://docs.npmjs.com/cli/install:)
• Execute npm install --save at:
  • M2MBridge directory
  • Each plugin directory

  LLRPReader plugin depends on java module and you should use the following options in the the npm install call:

  GYP_DEFINES="armv7l=0 javalibdir=/usr/lib/jvm/java-7-oracle/jre/lib/arm/server/" CCFLAGS='-march=armv7' CXXFLAGS='-march=armv7' npm install

• If you get this error; var cwd = process.cwd(); Error: No such file or directory #200

https://github.com/foreverjs/forever/issues/200

M2MBridge execution

• Customize the bridge configuration bridgeConfig,json, defining the templateId with the bridge instance from DAP to clone Cloud Configuration
• Execute node m2mbridge.js (located in the M2MBridge directory)

Tools for configuration

• If you want to connect a device (like the LLRP Reader) to your PI by sharing you network you may want to run:

nm-connection-editor

Find there the connection that represents your ethernet card and configure in IPv4 Settings the method Shared to other computers

• If you want to guess the IP that is assigned through DHCP to a device connected by using the previously mentioned option, you can inspect the syslog with:

grep DHCPREQUEST /var/log/syslog

The ansible way

This guide assumes you already have ansible installed (detailed instructions in this guide)

• Get a clone of the deployment project:

Remote debugging

• Install VSCode in your machine https://code.visualstudio.com/
• If you need to modify the node code at the Raspberry Pi while debugging setup a share directory using samba
  • Install Samba
  • sudo apt-get install samba samba-common-bin -y
  • Configure share directory
    • http://www.htpcguides.com/create-samba-share-raspberry-pi/
• At M2MBridge directory run
  • node --debug-brk M2MBridge.js
• At your laptop
  • Open shared or local folder from vscode
  • Configure launch.json https://code.visualstudio.com/Docs/editor/debugging
    • set "address": "raspberry-pi ip address" and "remoteRoot": "shared-directory name"

 
{
    "version": "0.2.0",
    "configurations": [
        {
            "name": "Launch",
            "type": "node",
            "request": "launch",
            "program": "${workspaceRoot}/M2MBridge.js",
            "stopOnEntry": false,
            "args": [],
            "cwd": "${workspaceRoot}",
            "preLaunchTask": null,
            "runtimeExecutable": null,
            "runtimeArgs": [
                "--nolazy"
            ],
            "env": {
                "NODE_ENV": "development"
            },
            "externalConsole": false,
            "sourceMaps": false,
            "outDir": null
        },
        {
            "name": "Attach",
            "type": "node",
            "request": "attach",
            "port": 5858,
            "address": "raspberry-pi ip address",
            "restart": false,
            "sourceMaps": false,
            "outDir": null,
            "localRoot": "${workspaceRoot}",
            "remoteRoot": "shared-directory name"
        }
    ]
}