How to install & execute

Os and core components

Manual installation of initial components and prerequesites

Installs Ubuntu OS on a Raspberry PI

https://ubuntu-mate.org/raspberry-pi/

Boot PI and update packages:

sudo apt-get update

sudo apt-get dist-upgrade

Install java 7 (if LLRPReader is needed)

sudo add-apt-repository ppa:webupd8team/java

sudo apt-get update

sudo apt-get install oracle-java7-installer

Install nodejs 5.x by adding this repository 'deb https://deb.nodesource.com/node_5.x xenial main' with:

curl -sL https://deb.nodesource.com/setup_5.x | sudo -E bash -

and then:

sudo apt-get install -y nodejs

Installs and configures Bluetooth core libraries (needed by bluetooth related plugins)

sudo apt-get install bluetooth bluez libbluetooth-dev libudev-dev

Allow nodejs to read from bluetooth devices (required by bluetooth related plugins):

sudo setcap 'cap_net_raw+eip' /usr/bin/nodejs

Allow non-privileged users (belonging to gpio group) to run GPIO commands (required by GPIO plugin):

git clone git://github.com/quick2wire/quick2wire-gpio-admin.git

cd quick2wire-gpio-admin

make

sudo make install

Add user that runs the bridge to communicate through serial ports (required by ArduinoSerial plugin):

adduser <username> dialout

Install snmp if you are planning to configure a SNMPDevice instance to monitor the Raspberry Pi

   how-to-install-and-configure-an-snmp-daemon-and-client-on-ubuntu-14-04
   sudo apt-get update
   sudo apt-get install snmp snmp-mibs-downloader
   sudo apt-get update
   sudo apt-get install snmpd
   sudo download-mibs
   ======================================================================
   Edit /etc/snmp.conf
   remove comment from #mibs : to mibs : 
   =======================================================================
   Edit /etc/snmp/snmpd.conf
   1)At ACCESS CONTROL give Full access from the local $
   *remove comment the line rocommunity public  localhost 
   *add the line rwcommunity private
   *comment #rocommunity public  default    -V systemonly
   *comment # rocommunity6 public  default   -V systemonly
       ###############################################################################
       #
       #  ACCESS CONTROL
       #
                                                        #  Full access from the local $
        rocommunity public  localhost
        rwcommunity private
                                                        #  Default access to basic sys$
       # rocommunity public  default    -V systemonly
       #  rocommunity6 is for IPv6
       # rocommunity6 public  default   -V systemonly
   2)At SYSTEM INFORMATION to make write/read sysLocation and sysContact
   *comment line #sysLocation    xxxxxx
   *comment line  #sysContact     xxxxxx
       ###############################################################################
       #
       #  SYSTEM INFORMATION
       #
       #  Note that setting these values here, results in the corresponding MIB object$
       #  See snmpd.conf(5) for more details
       #sysLocation    xxxxxx
       #sysContact     xxxxxx       
   ========================================================================================
   sudo service snmpd restart

M2MBridge installation

Use your credentials to identify yourself in the UI at https://platform.amtech.mx
By using the menu go to Main menu > Sensors > M2MBridge application
Save M2MBridge.tar.gz to the directory of your choice
Untar the content:

tar xzvf M2MBridge.tar.gz

Delete unneeded plugins from M2MBridge/plugins/xxx (optional)
Install packages for m2mBridge core and plug-ins (https://docs.npmjs.com/cli/install)
Install a couple of requirements:
- sudo apt-get install libzmq-dev libavahi-compat-libdnssd-dev
Execute npm install --save at:
- M2MBridge directory
- Each plugin directory
LLRPReader plugin depends on java module and you should use the following options in the the npm install call:

GYP_DEFINES="armv7l=0 javalibdir=/usr/lib/jvm/java-7-oracle/jre/lib/arm/server/" CCFLAGS='-march=armv7' CXXFLAGS='-march=armv7' npm install
If you get this error; var cwd = process.cwd(); Error: No such file or directory #200

https://github.com/foreverjs/forever/issues/200

M2MBridge execution

Customize the bridge configuration bridgeConfig,json, defining the templateId with the bridge instance from DAP to clone Cloud Configuration
Execute node m2mbridge.js (located in the M2MBridge directory)

Tools for configuration

If you want to connect a device (like the LLRP Reader) to your PI by sharing you network you may want to run:

nm-connection-editor

Find there the connection that represents your ethernet card and configure in IPv4 Settings the method Shared to other computers

If you want to guess the IP that is assigned through DHCP to a device connected by using the previously mentioned option, you can inspect the syslog with:

grep DHCPREQUEST /var/log/syslog

The ansible way

This guide assumes you already have ansible installed (detailed instructions in this guide)

In the directory of your choice, get a clone of the deployment project:
git clone https://github.com/AMTechMX/m2mbridge_deployment.git
Change directory to m2mbridge_deployment
Update your inventory by editing static_inventory file. Example:
```
 [rpis]
 10.0.0.10
 10.0.0.11
 10.0.0.12
```
Note: You need to configure private/public keys to access this hosts through SSH without password.
Configure common options in rpis/group_vars/all

Create a file for each host configured in rpi/host_vars whose name matches the IP address. For instance:

 plugins_enabled: [ SNMPDevice, LLRPReader ]
 bridge_description: Amtech M2M Bridge
 template_id: m2mCreator:m2mBridge
 bridge_id_prefix: tienda1
 location: {"wkt":"POINT(-99.17125583 19.40501031)","sContext":"geo"}
 address_country: usa
 address_city: Las Vegas
 address_road: Las Vegas Boulevard South
 address_number: 3960

cd into rpis directory
Run ansible playbook:
ansible-playbook -i static_inventory main.yml

Remote debugging

Install VSCode in your machine https://code.visualstudio.com/
If you need to modify the node code at the Raspberry Pi while debugging setup a share directory using samba
- Install Samba
- sudo apt-get install samba samba-common-bin -y
- Configure share directory
  - http://www.htpcguides.com/create-samba-share-raspberry-pi/
At M2MBridge directory run
- node --debug-brk M2MBridge.js
At your laptop
- Open shared or local folder from vscode
- Configure launch.json https://code.visualstudio.com/Docs/editor/debugging
  - set "address": "raspberry-pi ip address" and "remoteRoot": "shared-directory name"

 
{
    "version": "0.2.0",
    "configurations": [
        {
            "name": "Launch",
            "type": "node",
            "request": "launch",
            "program": "${workspaceRoot}/M2MBridge.js",
            "stopOnEntry": false,
            "args": [],
            "cwd": "${workspaceRoot}",
            "preLaunchTask": null,
            "runtimeExecutable": null,
            "runtimeArgs": [
                "--nolazy"
            ],
            "env": {
                "NODE_ENV": "development"
            },
            "externalConsole": false,
            "sourceMaps": false,
            "outDir": null
        },
        {
            "name": "Attach",
            "type": "node",
            "request": "attach",
            "port": 5858,
            "address": "raspberry-pi ip address",
            "restart": false,
            "sourceMaps": false,
            "outDir": null,
            "localRoot": "${workspaceRoot}",
            "remoteRoot": "shared-directory name"
        }
    ]
}

How to install & execute

Contents

Os and core components

Manual installation of initial components and prerequesites

M2MBridge installation

M2MBridge execution

Tools for configuration

The ansible way

Remote debugging

Navigation menu

Personal tools

Namespaces

Variants

Views

More

Search

Navigation

Tools