BLEGattCentral
From AMTech WikiDocs
BLEGattCentral
Bridge BLE GATT services and characteristics read and write to IoT DAP protocol.
- leverages BLE GATT (Generic Attribute Profile) standard
- services and characteristics can be configuring setting gattProfileConfig property
- Advertised device name List of devices name to be discovered (names the manufacture uses to advertise the device)
- Frequency to read characteristics value(s) an ISO 8601 string duration; representing how frequently characterictics values will be collected; defaults to 1 minute iso 8601 PT1M
- The amount of read cycles, the smoothing logic will consider for calculating lost observations
- Service UUID and name
- Characteristics UUID and name(can be selected for a list of supported characteristics specified at GATT services
- Metadata information used to parser characteristic buffer
- parmas
- extra
- Metadata information used to parser characteristic buffer
- Smoothing criteria each values decoded from the characteristic value can be configure to be smoothed by
- never
- always
- percentage changed
- value changed
- less than
- greater than
- range
- Smoothing criteria each values decoded from the characteristic value can be configure to be smoothed by
- Placeholders (See Placeholders)
- None
- Produced observations (see /amtech/linkeddata/types/composite/observation)
- /amtech/linkeddata/types/composite/observation/bLEServicesRead
- Commands (see /amtech/linkeddata/types/composite/observation)
- /None
