Difference between revisions of "BLEGattCentral"
From AMTech WikiDocs
| Line 4: | Line 4: | ||
*services and characteristics can be configuring setting gattProfileConfig property | *services and characteristics can be configuring setting gattProfileConfig property | ||
**'''Advertised device name''' List of devices name to be discovered (names the manufacture uses to advertise the device) | **'''Advertised device name''' List of devices name to be discovered (names the manufacture uses to advertise the device) | ||
| − | **'''Frequency to read characteristics value(s)''' an [https://www.iso.org/iso-8601-date-and-time-format.html ISO 8601] string duration; representing how frequently | + | **'''Frequency to read characteristics value(s)''' an [https://www.iso.org/iso-8601-date-and-time-format.html ISO 8601] string duration; representing how frequently characterictics values will be collected; defaults to 1 minute iso 8601 PT1M |
**The '''amount of read cycles''', the smoothing logic will consider for calculating lost observations | **The '''amount of read cycles''', the smoothing logic will consider for calculating lost observations | ||
**Service '''UUID and name''' | **Service '''UUID and name''' | ||
Revision as of 21:16, 18 September 2017
BLEGattCentral
Bridge BLE GATT services and characteristics read and write to IoT DAP protocol.
- leverages BLE GATT (Generic Attribute Profile) standard
- services and characteristics can be configuring setting gattProfileConfig property
- Advertised device name List of devices name to be discovered (names the manufacture uses to advertise the device)
- Frequency to read characteristics value(s) an ISO 8601 string duration; representing how frequently characterictics values will be collected; defaults to 1 minute iso 8601 PT1M
- The amount of read cycles, the smoothing logic will consider for calculating lost observations
- Service UUID and name
- Characteristics UUID and name(can be selected for a list of supported characteristics specified at GATT services
- Metadata information used to parser characteristic buffer
- parmas
- extra
- Metadata information used to parser characteristic buffer
- Smoothing criteria each values decoded from the characteristic value can be configure to be smoothed by
- Placeholders (See Placeholders)
- None
- Produced observations (see /amtech/linkeddata/types/composite/observation)
- /amtech/linkeddata/types/composite/observation/bLEServicesRead
- Commands (see /amtech/linkeddata/types/composite/observation)
- /None
