Difference between revisions of "Radiation"
From AMTech WikiDocs
(Created page with "=== Radiation === *id Radiation 15 *Bridge waspmote following sensors read to IoT DAP #IN_TEMP Device Temperature #BAT Battery level #ACC Acceleromete X,Y,Z...") |
|||
| Line 5: | Line 5: | ||
#BAT Battery level | #BAT Battery level | ||
#ACC Acceleromete X,Y,Z | #ACC Acceleromete X,Y,Z | ||
| − | + | #RAD Geiger tube | |
* Edge Intelligence | * Edge Intelligence | ||
Revision as of 18:30, 19 July 2017
Radiation
- id Radiation 15
- Bridge waspmote following sensors read to IoT DAP
- IN_TEMP Device Temperature
- BAT Battery level
- ACC Acceleromete X,Y,Z
- RAD Geiger tube
- Edge Intelligence
- Setting readSmoothing property allows to smooth each sensor read value by
- Send observation on value percentage changed
- Send observation on value changed
- Send observation if value greater than
- Send observation if value less than
- Setting readSmoothing property allows to smooth each sensor read value by
- Placeholders (See Placeholders)
- #{waspmoteName} waspmote model name
- #{waspmoteId} waspmote model numeric unique identifier
- #{blePeripheralUuid} ble unique id identifier
- Produced observations (see /amtech/linkeddata/types/composite/observation)
- /amtech/linkeddata/types/composite/observation/waspmoteSmartEnvironment
- Arduino sketch for Radiation configure with following sensors
