Difference between revisions of "Smart Water Ions"
From AMTech WikiDocs
Line 2: | Line 2: | ||
*id Smart_Water_Ions 17 | *id Smart_Water_Ions 17 | ||
*Bridge waspmote following sensors read to IoT DAP | *Bridge waspmote following sensors read to IoT DAP | ||
+ | #IN_TEMP Device Temperature | ||
+ | #BAT Battery level | ||
+ | #ACC Acceleromete X,Y,Z | ||
#SWICA Calcium Ions | #SWICA Calcium Ions | ||
#SWIFL Fluoride Ions | #SWIFL Fluoride Ions |
Revision as of 18:19, 19 July 2017
Smart Water Ions
- id Smart_Water_Ions 17
- Bridge waspmote following sensors read to IoT DAP
- IN_TEMP Device Temperature
- BAT Battery level
- ACC Acceleromete X,Y,Z
- SWICA Calcium Ions
- SWIFL Fluoride Ions
- WIFB Fluoroborate Ions
- SWINO Nitrate Ions
- SWIBR Bromide Ions
- SWICL Chloride Ions
- SWICU Cupric Ions
- SWIIO Iodide Ions
- SWIPB Lead Ions
- SWIAG Silver Ions
- SWIPH pH
- Edge Intelligence
- Setting readSmoothing property allows to smooth each sensor read value by
- Send observation on value percentage changed
- Send observation on value changed
- Send observation if value greater than
- Send observation if value less than
- Setting readSmoothing property allows to smooth each sensor read value by
- Placeholders (See Placeholders)
- #{waspmoteName} waspmote model name
- #{waspmoteId} waspmote model numeric unique identifier
- #{blePeripheralUuid} ble unique id identifier
- Produced observations (see /amtech/linkeddata/types/composite/observation)
- /amtech/linkeddata/types/composite/observation/waspmoteSmartEnvironment
- Arduino sketch for Smart_Water_Ions configure with following sensors